(86)-13465833201 +86 532-83659824
Tee bar Roll forming machine
Home > ProdutosTUBO INTERNO DA LINHA DE EXTRUSÃO

Produtos

inner tube extrusion line

TUBE EXTRUDING CONVEYOR LINE
FEATURES
The cooling line is applied for cooling, blowing off, printing, hole punching, valve pitting, soap stoning, leng thing and cutting after tube being extruded. The operation is fully automatic, with PLC control and adjusting for saving labor ,for high efficiency producing and less defective rate. The whole ling is a linked driving with inverter control, that the speed can be adjusted freely. 
Specification 
I.Tube Specification----Length :600—2500 mm              
                          Width :60 —350 mm    
                          Tube gauge :1-6 mm    
Total Length:35.2 meters     
Conveyor height :900 mm     
Conveyor belt width :500 mm 
Conveyor speed :3 –30 meters per minute 
Pull out conveyor belt: with color painting line unit.
Conveyor length : 800 mm 
Belt material : canvas rubber belt,3 plies, thick:5 mm 
Up & down movement driven by pneumatic cylinder 
Conveyor height adjustable between 900—1050 mm 
Can be adjustable pre-press device. 
II.Weighing balance conveyor     
Conveyor length : before balance 2200mm  
Conveyor length: after balance 1880mm  
Weighing balance to be provided by the costumer : 
Belt material :canvas belt , 3 plies ,thick:5mm 
III.Cooling conveyor 
Conveyor length : 16400mm(Engineering plastics module group conveyor) 
Roller height :650 mm 
Roller& water sprinkling pipe material :SUS 304 (stainless steel ) 
Cooper nozzle type water spraying . 
Adjustable centering device :2 positions 

IV.Tube drying and cutting unit
With roller delivery to make water removal. 
With roller delivery length :2600mm,Φ100x8pcs 
Air blower :2 sets (5HP) with 6 pce of blower nozzle (width :400mm ) 
Cutter equipped with and electric heating blade. 
Cutting length measured by encoder and setting from HMI touch scree 
Rotary cutter with clutch system 

V. Hole –punching and valve fitting unit for straight valve or curved valve
1.Conveyor belt material:PVC BELT,3 plies,thickness 1.8mm  
2.Hole punching heater:500W  
3.Punching temperature:170-320℃                
 (With thermometer and temperature control)  
4.Punching temperature to be dislay by digital indicator.  
5.Hole punching and a valve fitting position setting on HMI touch screen.  
6.Applicable tube width:min 600-Max 3000mm  
7.Cutting accuracy:+-3mm  
VI.Power spraying conveyor 
 1.Conveyor belt length:1800mm(with roller conveyor) 
 2.Roller material:SUS 304SS*15pcs  Φ80mm 
 3.Talck sprayor:2set(0.75kw)with 4 spraying nozzle  
VII.Pick-up Conveyor   
 1.Conveyor length:7850mm  
 2.Belt material PVC belts,3plies,thickness,1.8mm  
 3.Power parameter:380V50HZ 3phase  
 4.Compressed air supply:5kgf/cm2
VIII.Other requirement  
 1.PLC
 2.Touch screen
 3.Servo motor  
 4. Mitsubishi inverter