Home > PRODUCTSinner tube extrusion line
Products
inner tube extrusion line
|
TUBE EXTRUDING CONVEYOR LINE
FEATURESThe cooling line is applied for cooling, blowing off, printing, hole punching, valve pitting, soap stoning, leng thing and cutting after tube being extruded. The operation is fully automatic, with PLC control and adjusting for saving labor ,for high efficiency producing and less defective rate. The whole ling is a linked driving with inverter control, that the speed can be adjusted freely. Specification I.Tube Specification----Length :600—2500 mm Width :60 —350 mm Tube gauge :1-6 mm Total Length:35.2 meters Conveyor height :900 mm Conveyor belt width :500 mm Conveyor speed :3 –30 meters per minute Pull out conveyor belt: with color painting line unit. Conveyor length : 800 mm Belt material : canvas rubber belt,3 plies, thick:5 mm Up & down movement driven by pneumatic cylinder Conveyor height adjustable between 900—1050 mm Can be adjustable pre-press device. II.Weighing balance conveyor Conveyor length : before balance 2200mm Conveyor length: after balance 1880mm Weighing balance to be provided by the costumer : Belt material :canvas belt , 3 plies ,thick:5mm III.Cooling conveyor Conveyor length : 16400mm(Engineering plastics module group conveyor) Roller height :650 mm Roller& water sprinkling pipe material :SUS 304 (stainless steel ) Cooper nozzle type water spraying . Adjustable centering device :2 positions IV.Tube drying and cutting unit With roller delivery to make water removal. With roller delivery length :2600mm，Φ100x8pcs Air blower :2 sets (5HP) with 6 pce of blower nozzle (width :400mm ) Cutter equipped with and electric heating blade. Cutting length measured by encoder and setting from HMI touch scree Rotary cutter with clutch system V. Hole –punching and valve fitting unit for straight valve or curved valve 1.Conveyor belt material:PVC BELT,3 plies,thickness 1.8mm 2.Hole punching heater:500W 3.Punching temperature:170-320℃ (With thermometer and temperature control) 4.Punching temperature to be dislay by digital indicator. 5.Hole punching and a valve fitting position setting on HMI touch screen. 6.Applicable tube width:min 600-Max 3000mm 7.Cutting accuracy:+-3mm VI.Power spraying conveyor 1.Conveyor belt length:1800mm(with roller conveyor) 2.Roller material:SUS 304SS*15pcs Φ80mm 3.Talck sprayor:2set(0.75kw)with 4 spraying nozzle VII.Pick-up Conveyor 1.Conveyor length:7850mm 2.Belt material PVC belts,3plies,thickness,1.8mm 3.Power parameter:380V50HZ 3phase 4.Compressed air supply:5kgf/cm2 VIII.Other requirement 1.PLC 2.Touch screen 3.Servo motor 4. Mitsubishi inverter |
